Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Wausau, WI

Pool Deck Cleaning for Flagstone in Wausau, WI

Low-to-moderate pressure wash for flagstone. Pool deck cleaning that removes slippery algae, sunscreen residue and stains without damaging coatings or stone. Typical cost $200-$500.

Grime, mildew and stains build up a little at a time until one day the outside of your property looks years older. Pool Deck Cleaning for Flagstone in Wausau, WI brings it back, usually in a single visit. On flagstone, the method we use is low-to-moderate pressure wash.

The right method for the job

Low-to-moderate pressure washCleaning method
Usually 1,000-2,000 PSI, depending on the stonePressure

Cleaning solution: A stone-appropriate cleaner, tested on a small area first.

What to know about cleaning flagstone

Flagstone covers several stones, including sandstone, slate, bluestone and limestone, and they react differently to pressure and chemicals. Softer sandstone flakes if blasted, and mortar joints need care.

Avoid: High pressure on soft or layered stone, and acids on limestone.

How often: Every 1-2 years.

Is it time for pool deck cleaning for flagstone?

  • Slippery spots near the water
  • Black or green growth at the edges and in joints
  • Rust or leaf stains
  • Faded or dirty coating
  • Hard-water and chlorine residue

What causes the dirt and stains

  • Constant splashing and standing water
  • Sunscreen, body oils and pool chemicals
  • Leaves and pool toys left on the deck
  • Hard water drying on the surface

Easy upkeep between cleanings

  • Hose off the deck after heavy pool use
  • Remove leaves and toys before they stain
  • Keep chlorine and acid containers off the deck surface
  • Ask us before using any cleaner on a coated or stone deck

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Common mistakes to avoid

  • Peeling or etching a coated 'cool deck' surface with high pressure
  • Chemicals and wash water getting into the pool
  • Pitting travertine with acid cleaners
  • Slips on wet, treated surfaces

What happens on the day

  1. Check the deck material and coating
  2. Protect the pool and nearby plants
  3. Pre-treat algae and stains with pool-safe methods
  4. Clean with pressure suited to the surface
  5. Rinse thoroughly away from the water

Many pool decks have a textured acrylic or 'cool deck' coating. These need lower pressure than bare concrete, and a deck that is peeling may need recoating rather than more cleaning.

Pool Deck Cleaning for Flagstone cost in Wausau, WI

$200-$500Typical range for a typical residential pool deck
1-3 hoursTypical time on site
Once or twice a yearRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for flagstone

Pool Deck Cleaning for Flagstone in Wausau, WI

Freeze-thaw cycles and deicing salt are hard on concrete in Wisconsin. Cleaning it in spring and sealing it before winter reduces how much water and salt soak in, which is what causes surface flaking (spalling).

We provide pool deck cleaning for flagstone across Wausau (ZIP codes 54401, 54402 and 54403) and nearby towns including Schofield (3.6 mi), Rib Mountain (3.9 mi), Rothschild (5 mi) and Maine (5.5 mi). Call (555) 010-0000 for a free quote in Wausau.

Pool Deck Cleaning for Flagstone: frequently asked questions

How much does pool deck cleaning for flagstone cost in Wausau, WI?

Pool Deck Cleaning for Flagstone typically costs $200-$500 for a typical residential pool deck, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pool deck cleaning for flagstone?

For flagstone: usually 1,000-2,000 PSI, depending on the stone. What we avoid: high pressure on soft or layered stone, and acids on limestone. The cleaning solution does most of the work, followed by a gentle rinse.

Is pool deck cleaning for flagstone safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pool deck cleaning for flagstone?

Every 1-2 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Wausau, WI

Paver Cleaning & Sealing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $600-$1,800

Roof Cleaning for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $400-$1,000

Concrete Sealing for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $400-$1,200

Gum Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $200-$1,000

Rust Stain Removal for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$500

Gutter Cleaning

Clearing leaves and debris from gutters and flushing downspouts so water drains away from the house.

Typical $150-$350

Pressure Washing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$600

Graffiti Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$800

Exterior Mold & Mildew Removal for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$700

Graffiti Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $200-$800

Commercial Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $400-$2,000

Deck Cleaning

Deck washing that removes gray weathering, mildew and slippery growth from wood and composite decks without furring the boards.

Typical $250-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Wausau, WI. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote